Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
3. Remove front propeller shaft.
4. Rotate pinion gear three to four times, to verify pinion rotates smoothly.
5. Record pinion torque to rotate flange (1) with an inch pound torque wrench (2) for installation reference.
6. Hold flange with Holder 6719 and four bolts and washers.
7. Remove pinion nut.
8. Mark a line across the pinion shaft and flange (1) for installation reference.
9. Remove flange (1) with Remover C-452 (2).
10. Remove pinion seal with seal puller.
Installation
INSTALLATION
