dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

NV144 Transfer Case|Page 6480 > < NV144 Transfer Case
Page 2
background image

The mode sensor position will be considered invalid by the FCM if the voltage is greater than or equal to encoder_High_Range_Limit Volts or if it is
less than or equal to encoder_Low_Range_Limit Volts.

If FCM looses the encoder signal in a NV144 transfer case during a shift, the FCM will respond with a shift back in the opposite direction of travel to
first attempt to find the encoder signal. If the signal is not found, the FCM will drive motor in AWD direction for 1 second.

Refer to MODE SENSOR VOLTAGES - NV144 table for the mode sensor voltages.

NV144 Transfer Case|Page 6480 > < NV144 Transfer Case