Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Verify that the shift motor O-ring is clean and properly positioned inside the machined O-ring groove of the shift motor.
2. Add high temperature grease between the shift motor assembly and the transfer case mating surface for sealing purposes.
NOTE: Verify that the missing tooth (2) in the shift motor drive spline (1)...
NOTE: ...and the transfer case drive spline (1) missing tooth (2) are aligned. It may be necessary to manually shift the transfer case if the
shift motor and transfer case shaft are not aligned.
3. Position the shift motor and mode sensor assembly (1) onto the transfer case.