Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
NOTE: Lower spacers must be facing with the flat side upwards when installing into the slotted holes.
3. Position windshield (1) in center of windshield opening and resting on the side and lower spacers (2 & 3).
4. Adjust the lower spacers (3) as required, to obtain the specified roof gap tolerance by pushing on the side of the wedge and raising or lowering the
glass as necessary. For roof gap specifications, refer to the table Roof Gap Tolerances.
±±±±
5. Clean and check windshield for damage.
6. Position windshield in center of windshield opening.
7. Apply adhesive tape to the locations shown to aid with final installation.
8. Verify windshield gap is parallel to with windshield.
9. Cut tape with a sharp knife and remove windshield.
