Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Windshield Washer Spray Nozzle: Description and Operation
Description
Front
FRONT
The fluidic front washer nozzles (2) are constructed of molded plastic. Each nozzle has two integral latches that secure them in dedicated holes in the
hood panel near the base of the windshield. A check valve is integral to each front washer nozzle. The domed upper surface of the washer nozzle is
visible on the outside of the hood panel, and the nozzle orifice (1) is oriented towards the windshield glass. The washer plumbing fittings (4) for the
washer nozzles extend below the hood panel and are accessible from the engine compartment. The front washer nozzles cannot be adjusted or repaired
and, if ineffective or damaged, they must be replaced.
Rear
REAR