Durango 4WD V8-5.7L Hybrid (2009)
1. Install the hose (6).
2. Install the banjo bolt (4) and new cooper washers (3) at the caliper (2).
3. Install the mounting bolt (5) for the brake hose (6) at the frame.
4. Install the brake line (1) into the caliper hose (6).
5. Lower the vehicle and remove the support.
6. Remove the prop rod from the vehicle.
7. Bleed the area of repair for the brake system, If a proper pedal is not felt during bleeding an area of repair then a complete system bleed
procedure must be performed.See: Brake Bleeding/Service and Repair.