Durango 4WD V8-5.7L Hybrid (2009)
7. Remove the center air cleaner trim cover (2) with a small screwdriver (1).
8. Disconnect the intake air temperature (IAT) sensor electrical connector (1).
9. Disconnect the brake booster hose and positive crankcase ventilation (PCV) hose.
10. Remove the center air cleaner retaining bolt (2).
11. Slightly raise the front of the air cleaner housing (3) up off the throttle body.
12. Slide the air cleaner housing forward to remove the rear air cleaner housing pegs (2) from the grommets (1) on the rear of the intake manifold.
13. Remove the air cleaner housing from the vehicle.
