Durango 4WD V8-5.7L Hybrid (2009)
Crankshaft: Service and Repair
Crankshaft - Installation
INSTALLATION
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In
addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High
Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury See: Hybrid Drive
Systems/Battery System, Hybrid Drive/Service Precautions
1. Select the proper main bearings See: Crankshaft Main Bearing/Service and Repair
2. Install the main bearings in the cylinder block (1).
3. Install the main bearing shells (2) in the bearing caps (1).