Durango 4WD V8-5.7L Hybrid (2009)
Evaporator Core: Service and Repair
Rear A/C Evaporator - Removal
REMOVAL
1. Remove the rear heater-A/C housing and place it on a workbench See: Housing Assembly HVAC/Service and Repair/Removal and
Replacement/Front HVAC Housing Removal.
2. Disassemble the rear heater-A/C housing as necessary to gain access to the rear A/C evaporator (1) See: Housing Assembly HVAC/Service and
Repair/Overhaul/Disassembly/Front HVAC Housing.
NOTE: If the insulator around the A/C evaporator or evaporator tubes is deformed or damaged, the insulator must be replaced.
3. Carefully remove the rear A/C evaporator out of the outboard half of the rear heater-A/C housing (3).
NOTE: If the rubber seal is deformed or damaged, the seal must be replaced.
4. If required, remove the rubber seal (2) from the rear heater-A/C housing.
