Durango 4WD V8-5.7L Hybrid (2009)
Hybrid Battery Cover: Service and Repair
High Voltage Battery Cover - Installation
INSTALLATION
1. Install the screws and nuts to the top cover. Tighten to 6 Nm (53 in. lbs.)
2. Install the terminal block cover assembly. Tighten to 10 Nm (7 ft. lbs.)
3. Install the high voltage battery carpet.
4. Install the rear seat See: Body and Frame/Seats/Service and Repair/Seat, Front/Seat - Removal
5. Perform the high voltage power up procedure . See: Service and Repair/Battery System - High Voltage Power Up
6. Install the high voltage battery trim covers (1).
