Durango 4WD V8-5.7L Hybrid (2009)
Canister Purge Solenoid: Service and Repair
Fuel Tank Isolation Valve - Installation
INSTALLATION - HEV
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In
addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High
Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury See: Hybrid Drive
Systems/Battery System, Hybrid Drive/Service Precautions
1. Slide the fuel tank isolation valve onto the EVAP canister mounting bracket.
2. If removed, connect the pig tail electrical connector (2) to the fuel tank isolation valve.
