Durango 4WD V8-5.7L Hybrid (2009)
Fuel Injector: Service and Repair
Fuel Injector - Installation
INSTALLATION - HEV
NOTE: If the same fuel injector is to be reinstalled, install new O-rings.
NOTE: Apply a small amount of clean engine oil to each injector O-ring. This will aid in the installation.
1. Install the fuel injector (3) into the fuel rail (4) using a side to side motion while pushing injector into the fuel rail assembly.
2. Using suitable pliers (1), install the fuel injector retaining clip (2).
3. Install the fuel rail assembly See: Fuel Rail/Service and Repair/Fuel Rail - Installation
4. Perform the HEV high voltage power up procedure See: Hybrid Drive Systems/Battery System, Hybrid Drive/Service and Repair/Battery System
- High Voltage Power Up
5. Start engine and check for fuel leaks.
