Durango 4WD V8-5.7L Hybrid (2009)
Battery Current Sensor: Service and Repair
High Voltage Current Sensor - Removal
REMOVAL
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In
addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High
Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury See: Hybrid Drive
Systems/Battery System, Hybrid Drive/Service Precautions
1. Remove the high voltage battery cover See: Hybrid Drive Systems/Battery System, Hybrid Drive/Hybrid Battery Cover/Service and Repair/High
Voltage Battery Cover - Removal.
2. Remove the terminal block cover assembly.
3. Remove the four side shield bolts.
