Durango 4WD V8-5.7L Hybrid (2009)
Alternator: Service and Repair
Generator - Removal
REMOVAL
CAUTION: Disconnect the negative battery cable before removing the battery output wire from generator. Failure to do so can result in
injury or damage to electrical system.
1. Disconnect the negative battery cable (1).
CAUTION: Do not let the tensioner arm snap back to the free arm position, severe damage may occur to the tensioner.
2. Insert a suitable square drive ratchet into the square hole on the belt tensioner arm (7).
3. Release the belt tension by rotating the tensioner (7) clockwise until the accessory drive belt (4) can be removed from the generator pulley only
See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Removal