Durango 4WD V8-5.7L Hybrid (2009)
Torsion Bar: Service and Repair
Front Suspension Torsion Bar Crossmember Bushing - Removal
TORSION BAR CROSSMEMBER BUSHING
1. Remove the torsion bar cross member.
2. Secure the cross member in a vise.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
3. Install special tools C4212-F (Press)(1), 9335-2 (Receiver)(4), 9335-3 (Driver)(2) and 9335-4 (Spacer)(3) as shown in the graphic.
4. Press out the bushing.
