dodge Workshop Repair Guides

Dodge Durango 4WD V8-57L Hybrid Service and Repair Manuals

ABOUT US
Sensors and Switches - A/T > < Seal - Removal|Page 4806

Durango 4WD V8-57L Hybrid (2009) Automatic Transmission Seal Removal

Page 2
background image

5. Check damper seating with Gage Bar 6311 (1) and straightedge (2). Surface of damper should be at least 26mm (1.02 in.) to the straightedge when

damper is fully seated.

6. Install the transmission into the vehicle. See: Service and Repair/Removal and Replacement/Installation. 

REAR OUTPUT SHAFT SEAL

1. Using seal installer Seal Installer C-3860-A (1), install a new rear output shaft seal (2).
2. Install the transfer case into the vehicle.See: Transfer Case/Service and Repair/Removal and Replacement/MP3010 Transfer Case - Installation.

Sensors and Switches - A/T > < Seal - Removal|Page 4806