Durango 4WD V8-5.9L VIN Z (1998)
Alignment: Service and Repair
Front Vehicle Ride Height Adjustment
HEIGHT ADJUSTMENT
To adjust the vehicle height turn the torsion bar adjustment bolt CLOCKWISE to raise the vehicle and COUNTER CLOCKWISE to lower the
vehicle.
CAUTION: ALWAYS raise the vehicle to the correct suspension height, NEVER lower the vehicle to obtain the correct suspension height. If the
vehicle suspension height is too high, lower the vehicle below the height specification. Then raise the vehicle to the correct suspension height
specification. This will insure the vehicle maintains the proper suspension height.
NOTE: If a height adjustment has been made, perform height measurement again on both sides of the vehicle.
