Durango 4WD V8-5.9L VIN Z (1998)
Passenger Side Airbag Module Remove/Install
6. Remove the passenger side airbag module from the upper airbag door flange and bracket on the instrument panel top cover.
7. When installing the passenger side airbag module, use only the correct rivets that are specified in the Chrysler Mopar Parts Catalog, or that are
supplied in the service package with the new airbag module and/or the new instrument panel top cover.
8. Remove the tape applied in Step 3 from the passenger side airbag module vents.
9. Reverse the remaining removal procedures to complete the installation.
10. When reinstalling the instrument panel top cover, be certain that the airbag module wire harness connector latches are fully engaged.
11. Do not connect the battery negative cable at this time. See Airbag System in the Diagnosis and Testing for the proper procedures.
