Durango RT 4WD V8-5.9L VIN Z LDC (2002)
Expansion Valve: Description and Operation
Front
A/C EXPANSION VALVE - FRONT
The front "H" valve-type thermal expansion valve (TXV) is located at the dash panel between the liquid and suction lines, and the evaporator coil.
High-pressure, high temperature liquid refrigerant from the liquid line passes through the expansion valve orifice, converting it into a
low-pressure, low-temperature mixture of liquid and gas before it enters the evaporator coil.
The expansion valve control head monitors the temperature and pressure of the refrigerant leaving the evaporator coil through the suction line, and
adjusts the orifice size at the liquid line to let the proper amount of refrigerant into the evaporator coil to meet the vehicle cooling requirements.
Controlling the refrigerant flow through the evaporator ensures that none of the refrigerant leaving the evaporator is still in a liquid state, which
could damage the compressor.
The expansion valve is a factory calibrated unit and cannot be adjusted or repaired. If faulty or damaged, the expansion valve must be replaced.
