Durango RT 4WD V8-5.9L VIN Z LDC (2002)
Intake Air Temperature (IAT) Sensor: Service and Repair
Fig. 23 Intake Manifold Air Temperature Sensor - 3.9/5.2/5.9L Engines - Typical
REMOVAL
The intake manifold air temperature sensor is located in the front/side of the intake manifold.
1. Remove air duct at throttle body.
2. Disconnect electrical connector at sensor.
3. Remove sensor from intake manifold.
INSTALLATION
The intake manifold air temperature sensor is located in the front/side of the intake manifold.
1. Install sensor to intake manifold. Tighten to 28 Nm (20 ft. lbs.) torque.
2. Install electrical connector.
3. Install air duct at throttle body.