Durango RT 4WD V8-5.9L VIN Z LDC (2002)
Front Steering Knuckle: Service and Repair
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, rotor, shield and ABS wheel speed sensor if equipped.
4. Remove the front halfshaft.
5. Remove the tie rod end nut. Separate the tie rod from the knuckle with Remover C-3894A.
6. Support the lower suspension arm with a hydraulic jack and raise the jack to unload the rebound bumper.
CAUTION: When installing Remover MB-991113 to separate the ball joint, be careful not to damage the ball joint seal.
