Durango RT 4WD V8-5.9L VIN Z LDC (2002)
2. Install axle shaft bearing with Installer 5063 and Handle C-4171 (Fig. 23).
3. Install a new axle shaft seal with Installer 8402 and Handle C-4171.
4. Install the axle shaft and half shaft.
Axle Shaft Seals
C205F - Front Axle Seals
REMOVAL
1. Remove half shaft and axle shaft.
2. Remove the axle shaft seal with a small pry bar.
INSTALLATION
1. Wipe the axle shaft tube bore clean.
2. Install a new axle shaft seal with Installer X402 and Handle C-4171.
3. Install the axle shaft and half shaft.
