Dynasty L4-153 2.5L SOHC (1988)
Strut / Shock Tower: Technical Service Bulletins
Front Shock Tower - Metal Screws/Bolts Precautions
NO.: 02-08-92
GROUP: Suspension
DATE: Dec. 14, 1992
SUBJECT:
Installation Of Sheet Metal Screws Or Bolts Into The Front Shock Towers
MODELS:
1989 - 1993 (AA)
Spirit/Acclaim/LeBaron Sedan
1989 - 1993 (AC)
Dynasty/New Yorker/New Yorker Salon
1989 - 1993 (AG)
Daytona
1989
(AH)
Lanced LeBaron GTS
1989 - 1993 (AJ)
LeBaron Coupe/LeBaron Convertible
1989 - 1990 (AQ)
Horizon/Omni
1989 - 1993 (AP)
Shadow/Shadow Convertible/Sundance
1989 - 1991 (AQ)
Chrysler's TC (Maserati Coupe)
1989 - 1993 (AS)
Caravan/Grand Caravan/Caravan C/V
Voyager/Grand Voyager/Town & Country
1990 - 1993 (AY)
Imperial/New Yorker Fifth Avenue
1988
(C)
Dynasty/New Yorker
1984 - 1988 (E)
Caravelle/600/New Yorker Turbo
1984 - 1988 (G)
Daytona/Laser
1985 - 1988 (H)
Lancer/LeBaron GTS
1987 - 1988 (J)
LeBaron Coupe/LeBaron Convertible
1984 - 1988 (K)
Reliant/Aries/LeBaron 4-Door/Town & Country
1984 - 1988 (L)
Horizon/Omni
1987 - 1988 (P)
Shadow/Sundance
1984 - 1988 (S)
Caravan/Grand Caravan/Caravan C/V
Voyager/Grand Voyager/Town & Country
DISCUSSION:
It is very important that no sheet metal screws, bolts or other metal fasteners be installed in the shock towers in place of plastic clips. Also, no holes
should be drilled in the shock tower for installation of any metal fasteners (see illustration, area "A").
Because of the minimum clearance in this area, installation of metal fasteners could damage the coil spring coating. If a plastic clip is lost or broken,
replace the clip with the equivalent part called out in the appropriate Mopar Parts Catalog.
