Dynasty L4-153 2.5L SOHC (1988)
8.
Remove the rear parking brake cable retaining clips at the bracket near the front of the rear suspension trailing arm and caliper. Disconnect the
cable from the parking brake lever of the caliper (Refer to Figure 3).
9.
Disconnect the brake hose from the caliper.
CAUTION:
EXCESSIVE VISE PRESSURE WILL DAMAGE THE CALIPER.
10.
Clamp the caliper assembly in a SOFT jaw vise.
11.
Clean the area around the dust boot with Mopar Brake Parts Cleaner (P/N 4518037) or alcohol and wipe dry.
12.
Remove the dust boot from the caliper and piston grooves and discard (Refer to Figure 4).
13.
Clean the caliper grooves and the exposed part of the piston with Mopar Brake Parts Cleaner (P/N 4518037) or alcohol and wipe dry.
