Dynasty L4-153 2.5L SOHC (1988)
same manner.
9.
Cut the supplied foam tube and wrap it around the bypass valve (Figures 7 and 8).
10.
Tighten the supplied "push-in" tie strap around the foam tubing and cut off excess strap.
11.
Engage the push-in tie strap in the drilled 1/4 inch hole (Figures 7 and 8).
NOTE:
Because the hoses and hose routing differ on the 3-speed and 4- speed transmission, the valve assembly must be positioned
differently for each -- valve mounted vertically for the 4-speed and at an angle for the 3- speed.
12.
Tighten all hose clamps to 2 N-m (15 in.lbs).
13.
Install the other supplied tie strap to secure the assembly to the frame rail (Figures 7 and 8). Cut off excess strap.
14.
Check and, if necessary, adjust transmission oil level.
Completion Information
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted by DIAL dealers on the DIAL System. Non DIAL dealers may submit WROS. Claims
submitted will be used by Chrysler to record recall service completions and provide dealer payments.
Enter only one VIN per claim on a WRO. Fill in the labor operation number and time allowance and write on the WRO "Customer Satisfaction
Notification # 281T --Transmission Oil Cooler Bypass Valve." Do not enter other service claims on the same WRO.
Use the following labor operation number and time allowance:
Labor Operation
Time
Number
Allowance
Install transmission oil cooler bypass valve.
21281282
0.5 Hour
Note:
See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing instructions.
Parts Return
Not applicable.
Vehicle Not Available
If a vehicle is not available for this service for a known reason, let us know by filling outthe pre-addressed Vehicle Disposition Form portion of the
Owner Recall Notification Form or describe the reason on a postcard and mall to:
Chrysler Motors 416-15-19 Recall Coordination P.O. Box 1919 Detroit, Michigan 48231-9986
Following the above procedures will expedite the processing of your claim.
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.
Customer Letter
CUSTOMER SATISFACTION NOTIFICATION -- TRANSMISSION OIL COOLER BYPASS VALVE
Dear Chrysler Motors Vehicle Owner:
The satisfaction of our customers is very important to Chrysler. Because of this, we are offering a free repair service to owners of certain 1988 and 1989
model vehicles equipped with the heavy duty trailer tow package. Included are the Plymouth Voyager and Grand Voyager, Dodge Caravan, Grand
Caravan, Caravan C/V and Grand Caravan C/V. Your vehicle, whose Vehicle Identification Number is shown on the enclosed form, is included in this
offer. This service and the required parts as described in this letter will be provided without charge.
The service is needed to prevent possible transmission damage in extremely cold weather resulting from restricted flow of transmission fluid through the
oil cooler. We ask that you arrange for this important service without delay.
To correct the condition, your dealer will install a bypass valve to ensure an adequate fluid supply to the transmission at all times. The work will take less
than one hour to complete. However, additional time may be required depending on how service appointments are scheduled and processed. To arrange
for this service:
