Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
Fig. 5 Installing Inboard Pad
Fig. 6 Installing Outboard Pad
INSTALLATION
The inboard pads are interchangeable and may be used on either side of vehicle. The outboard pads are not interchangeable and are marked "L" for left
side or "R" for right side of vehicle.
1.
Lubricate adapter ways with suitable grease.
2.
Install inboard pad in caliper, entering retainer into bore of piston.
3.
Position properly marked outboard pad hold-down spring into caliper as shown.
4.
Lower caliper over braking disc, then install attaching bolts. Torque bolts to specifications.
5.
Install tire and wheel assembly and lower vehicle.
