Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
Fig. 41 Piston & Connecting Rod Assembly. 1990 Turbo Models
When installing piston and rod assembly, valve cut must face toward manifold side of engine, Fig. 39 through 41. Turbocharged engine pistons will
have an arrow or dimple toward front of engine. Oil hole on connecting rod must face timing belt side of engine.
Connecting rod side clearance should be 0.005 - 0.013 inch. On 1989 models, there is a maximum limit of .015 inch.
