Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
Heater Hose: Service and Repair
Heater Hose 2.2-2.5L
REMOVAL AND INSTALLATION
WARNING: Review Safety Precautions in General Information section before proceding with this operation.
1. Drain engine cooling system.
2. Loosen clamps at each end of hose to be removed.
3. Carefully rotate hose back and forth while tugging slightly away from connector nipple.
CAUTION: When removing hoses from heater core inlet or outlet nipples "DO NOT" exert excess pressure, the heater core may become
damaged and leak engine coolant into heater A/C unit.
To install, reverse the preceding operation.
