Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
The EVIC head monitors information provided by the body controller, engine compartment node, and engine controller. Any failure of a monitored
system results in a warning message on the EVIC head monitor.
The manual compass calibration procedure has been replaced by a continuous and automatic procedure that is performed by the engine node.
Automatic calibration does not require operator interface.
Mechanical Instrument Cluster
The mechanical instrument cluster (MIC) operates independently with the exception of three functions controlled by the body controller. These
functions are:
Seat Belt Warning Lamp: The body controller turns on the seat belt warning lamp for approximately six seconds when the ignition is turned on.
Low Fuel Warning Lamp: The body controller turns on the low fuel lamp when the fuel level drops to approximately 3.2 gallons including tank
reserve.
Check Gauges Lamp: The body controller turns on the "CHECK GAGES" lamp when the engine controller issues a high temperature warning or a
charging system failure via the CCD bus system.
