Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
3.
Type the required information on the Authorized Modification Label as shown and attach near the VECI Label.
REPAIR PROCEDURE FOR 1994 MODEL YEAR VEHICLES
PCM (Powertrain Control Module) RE-PROGRAMMING
This repair involves selectively erasing and reprogramming the PCM with new software (calibrations) for the 1994 model year vehicles.
EQUIPMENT/PARTS REQUIRED:
1
CH1000
Scan Tool (DRBII)
1
CH3502
Flash Programming Cartridge
1
CC2000
Standard Engine Diagnostic Cable
1
CH1500
Flash Programming Adapter
1
4669020
Authorized Software Update Label
1
4275086
Authorized Modification Label
MULTI-PART NUMBER FLASH RE-PROGRAMMING INSTRUCTIONS
1.
Insert the Flash Programming Cartridge into the DRBII.
2.
Connect the DRBII to the Flash Programming Adapter.
3.
Connect the Flash Programming Adapter to the engine 6-Way Cable.
4.
Connect the engine 6-Way Cable to the engine Diagnostic Connector.
5.
Connect the engine 6-Way Cable Red Battery Clip to the positive terminal of the vehicle battery.
6.
Turn the vehicle ignition on.
