Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
1.
Remove cable from spark plug.
2.
Lift distributor cap from distributor with cables intact. Do not remove cables from cap. The cables must be removed from the spark plugs.
3.
Connect the ohmmeter between spark plug end terminal and the corresponding electrode inside the cap, ensure probes make good contact.
Resistance should be within tolerance.
4.
If the resistance is not within tolerance, remove cable at cap tower and check the cable.
5.
If resistance is still not within tolerance, replace cable assembly.
6.
Test all spark plug cables in same manner.
Coil to Distributor High Tension Cable
1.
Remove distributor cap with the cable intact. Do not remove cable from the cap.
2.
Remove the cable at coil tower
3.
Connect the ohmmeter between center contact in the cap and the coil end of cable.
4.
If resistance is not within tolerance, replace the cable.
