Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
Outboard Shoulder Harness/Lap Belt
1. Remove quarter trim panel.
2. Remove bolt holding lap belt to floor at wheelhouse kickup.
3. Remove bolt holding turning loop to inner quarter panel.
4. Remove bolt holding seat belt retractor to quarter panel.
5. Reverse the preceding operation for installation.
Inboard Buckle/Center Occupant Belts
1. Remove rear seat cushion.
2. Remove bolt holding inboard buckle/center occupant belt to floor.
3. Separate buckle/belt assembly from vehicle.
4. Reverse the preceding operation for installation.
