Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
Throttle Valve Cable/Linkage: Adjustments
Cable Type
1. Perform adjustment with engine at operating temperature.
2. Loosen cable mounting bracket lock screw.
3. Position mounting bracket with both alignment tabs touching transaxle cast surface.
4. Release cross-lock on cable assembly by pulling the cross-lock upward. To ensure proper adjustment, the cable must be free to slide all the way
toward engine, against its stop, after the cross-lock is released.
5. Move transaxle throttle control lever fully clockwise against its internal stop, and press cross-lock downward into locked position.
6. Check cable for freedom of movement by moving throttle control lever.
Rod Type
1. Ensure engine is at operating temperature.
2. Loosen adjustment swivel lock screw. Swivel must slide freely along flat end of throttle rod.
3. Hold transaxle throttle lever firmly toward engine, against its internal stop. Torque swivel lock screw to 100 lb-in.
