Dynasty L4-153 2.5L SOHC VIN K TBI (1992)
Wiper Motor: Service and Repair
NOTE:Refer to Air Bag(s) Arming and Disarming to disable airbag before proceeding. See: Body and Frame/Interior Moulding / Trim/Dash
Panel/Air Bag(s) Arming and Disarming
1. Disconnect battery ground cable.
2. Remove wiper arms, then the plastic cowl cover.
3. Remove pivot mounting stud retaining nuts and disconnect wiper motor wiring connector.
4. Remove motor mounting bracket retaining bolts, then the motor assembly from cowl plenum.
5. Reverse procedure to install.