Dynasty V6-201 3.3L (1990)
lamp fastener and the slotted hole adjacent to it, (Figure 2).
13.
Use the supplied, smaller mastic patch to secure the underhood lamp wire to the large mastic patch in the location shown in Figure 3.
14.
Reinstall the windshield washer fluid reservoir.
15.
Reinstall the cowl screen, using the supplied plastic fastener to secure the far right side.
16.
Reinstall the right side windshield wiper arm.
17.
Reconnect the battery.
18.
Test the blower motor operation at all speeds.
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.
Use one of the labor operation numbers and time allowances (see illustration).
Note:
See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing instructions.
Parts Return
Not required.
Vehicle Not Available
If a car is not available for service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the Owner
Recall notification Form or describe the reason on a postcard and mail to:
Chrysler Corporation 415-03-18
Recall Coordination
P.O. Box 1919
Detroit, Michigan 48231-9986
