Dynasty V6-201 3.3L VIN R FI (1992)
Fig. 24 Engine Bracket
10.
Remove idler pulley from engine bracket, then the engine bracket, Fig. 24.
Fig. 25 Timing Case Cover
11.
Remove cam sensor from chain case cover, then the chain case cover, Fig. 25.
Installation
1.
Ensure mating surfaces of chain case cover are clean and free of burrs. Crankshaft oil seal must be removed to ensure correct oil pump
engagement.
Fig. 28 Removing Crankshaft Oil Seal
2.
Remove crankshaft oil seal using crankshaft removal tool No. C-4991 or equivalent, as shown in Fig. 28. Use caution not to damage crankshaft
seal surface of cover.
