Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
Trim Panel: All Technical Service Bulletins
Sliding Door Trim Panel - Removal Procedure Revision
Models
1988 S-Body
Subject
Sliding Door Trim Panel Removal Procedure Revision
Index
BODY
Date
May 16, 1988
No.
23-08-88
P-1877
(C23-09)
A change was made in early production 1988 S-body sliding door trim. A screw was added to the lower trim panel carpet area and is not readily visible
because of the carpet material. This requires a change in the removal procedure to prevent breakage of the trim panel.
NOTE:
IT IS IMPORTANT THAT THE COMPLETE TRIM PANEL BE REMOVED TO SERVICE ANY COMPONENTS TO PREVENT
BREAKAGE OF THE PANEL.
Trim Panel Removal
1.
With door closed, remove latch remote control bezel.
2.
Remove two screw plugs, two screws, and upper arm trim cover.
3.
Remove seven plastic trim panel fasteners.
4.
Remove one screw plug and the screw.
