dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Inside Rear View Mirror|Page 3715 > < Diagram Information and Instructions|Page 3712
Page 1
background image

Mirrors: Service and Repair
Inside Rear View Mirror

Rear View Mirror Assembly

Rear View Mirror

REMOVAL

1. Loosen the set screw and slide the mirror up and off the button.
2. Installation is accomplished by sliding the mirror over the button and tightening the set screw. Care should be exercised not to over tighten the

screw.

Rear View Mirror Button Assembly

Rear View Mirror

1. Using a wax pencil, locate and mark the mounting position of the button on the outside of the windshield.
2. If the vinyl pad had remained on the windshield glass, apply "low heat" to it with an electric heat gun until the vinyl softens; then peel the vinyl

pad from the glass.

3. Thoroughly clean the inner surface of the windshield glass in the mounting area of the mirror button using a mild abrasive cleaning powder such as

Ajax, Comet, or equivalent, on a clean cloth saturated with alcohol. Then, apply alcohol to a paper towel and wipe off any traces of remaining
cleaner.

4. Thoroughly sand the windshield mounting surface (the side with least surface area) of the mirror button with a clean piece of fine grit sandpaper

Inside Rear View Mirror|Page 3715 > < Diagram Information and Instructions|Page 3712