Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
Brake Bleeding: Service and Repair
1.
On models equipped with Rear Wheel Anti-Lock brakes (RWAL), connect one end of a suitable hose to bleeder valve on RWAL hydraulic
valve and submerge other end in a glass container partially filled with clean brake fluid.
2.
Pump brake pedal several times, then hold pedal down firmly.
3.
With pedal firmly depressed, open bleeder valve until pedal fades to floor, then close bleeder valve.
4.
Repeat procedure until a continuous flow of brake fluid is released from bleeder valve. Ensure a fluid level is maintained in master cylinder at
all times.
5.
On all models, perform steps 2, 3 and 4 on right rear, left rear, right front and left front brake in that order.
6.
After bleeding of brakes is completed, road test vehicle to ensure brakes are operating correctly and pedal is solid.
