Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
Installing Crankshaft, Intermediate Shaft, And Camshaft Seal
1. Shaft seal lip surface must be free of varnish, dirt or nicks. If needed polish sealing surface with #400 grit paper.
2. Install all seals on 2.2L and 2.5L engines, (except 2.5L crank seal), with factory tool (C-4680) or equivalent. The crankshaft seal on the 2.5L
engine must be installed using factory tool (C-4992) or equivalent.
NOTE: On late model 1981 2.2L engines, the camshaft oil seals were changed from steel backed to uni-directional rubber backed type seals. This
change made necessary an increase in the cylinder rear seal bore to prevent accidental mixing of uni-directional front and rear seals.
The replacement seal for early built 2.2L engines will also be rubber backed with arrows indication direction of rotation and location in the head
marked on seal. The seals must be installed as indicated.
