Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
Fig. 15 Evaporator heater assembly
20.
Remove heater core tube retaining bracket attaching screw, then lift the heater core straight up.
21.
Lift evaporator up and out of unit.
22.
Remove sound shield attaching screws, then blower motor assembly.
INSTALLATION
Fig. 15 Evaporator heater assembly
1.
Install the blower motor and sound shield.
2.
Install the evaporator to the heater-a/c housing.
3.
Install the heater core and secure with one screw through the attaching bracket.
4.
Install the top cover, making sure the blend-air door is properly located in the bottom of the heater-a/c housing. Secure top cover with 13 screws.
5.
Feed the vacuum harness through the hole and secure with one screw.
6.
Slide the heater-a/c unit under the lower right instrument panel. Feed the vacuum hoses through the hole in the firewall.
7.
Raise and install the heater-a/c unit to the firewall, making sure the mounting studs go completely through and the vacuum hoses are not pinched.
8.
Secure the heater-a/c unit with one screws through the hangar strap and four nuts on the mounting studs.
9.
Attach the temperature control cable, blower motor wiring, and resistor wiring.
