dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Injector > < Fuel Delivery and Air Induction|Specifications
Page 1
background image

Fuel Pressure Release: Service and Repair

1. Loosen gas cap and allow tank pressure to release.
2. Remove wiring harness connector from any injector, then ground one injector terminal.
3. Connect a suitable jumper wire to a second terminal, then touch the positive post of the battery for approximately 10 seconds and release system

pressure.

4. Remove jumper wires and service fuel system as required.

Fuel Injector > < Fuel Delivery and Air Induction|Specifications