Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
Hall Effect Sensor: Service and Repair
Distributor Cap
REMOVAL/INSTALLATION
1.
Remove splash shield and distributor cap by removing both distributor cap hold down screws.
2.
Remove rotor from distributor shaft.
3.
Remove hall effect pick-up assembly.
4.
When installing hall effect assembly make sure pick-up leads are correctly routed to avoid damage.
5.
Reinstall distributor rotor.
6.
Reinstall distributor cap and splash shield.
7.
Set timing, refer to ADJUSTMENTS PROCEDURES.
