Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
Power Door Lock Switch: Testing and Inspection
Sliding Door Circuit Test
Sliding Side Door Power Lock Assembly
1.
Connect one lead of a test light to the upper contact of the pillar, and place the other lead to the lower contact.
2.
If the test light illuminates when the lock switch is depressed, the wiring circuit to the contacts is good. If the test light does not illuminate, check
the electrical connectors at the right side cowl, check for a broken wire, or see Circuit Breaker Test.
3.
With the sliding door partially open, connect jumper wires across contacts on pillar to contacts on the door. The door should lock or unlock when
