Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
Throttle Valve Cable/Linkage: Adjustments
Fig. 3 Throttle cable linkage
1.
Ensure engine is at normal operating temperature.
2.
Loosen adjusting bracket lock screw, Fig. 3.
3.
Position bracket with both alignment tabs touching transaxle cast surface.
4.
Torque adjusting bracket lock screw to 105 inch lbs.
5.
Release cross-lock on cable assembly by pulling upward.
6.
To ensure proper adjustment, cable must be free to slide completely towards engine, against its stop, after cross-lock is released.
7.
Move transaxle throttle control lever fully clockwise against its internal stop, then press cross-lock downward into locked position.
8.
Connect choke, if disconnected, then test cable operation for freedom by moving transaxle throttle lever forward, then slowly release it to ensure
full return.
