Grand Caravan L4-153 2.5L SOHC VIN K TBI (1988)
8.
If the vehicle is electric regulator equipped, locate the wiring harness extension package (P/N K4746909). Determine which insulator in the
package needs to be installed to the door harness end of the wiring harness extension (black for 1988 and prior, red for 1989 and 1990). Referring
to Figure 2 for proper wire to insulator orientation, assemble the appropriate insulator to the wiring harness extension. If the red insulator is used,
the wedge must be installed in the terminal end of the insulator and xmas tree fastener must be inserted into the slot on the side of the red insulator.
9.
Install the wiring harness extension (P/N K4746909). Use the xmas tree fasteners of the insulators to secure the harness to the door, refer to Figure
3. At the forward attachment point, the insulator must be installed so it is inside the door cavity. At mid-door attachment, install the insulator so it
is outside the door cavity. Bend the tab back into the door so the insulator becomes flush to slightly underflush with the inner door panel.
10.
Verify the proper operation of the window. Adjust as necessary. Tighten the upstop screw.
11.
Reinstall the door trim.
POLICY: Information Only
