dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body and Frame|Frame > < Body Side Moldings and Cladding - Redesigned
Page 1
background image

Upper Side Moulding / Trim: Technical Service Bulletins
Body Side Moldings and Cladding - Redesigned

NO: 23-21-95

GROUP: Body

DATE: May 5, 1995

SUBJECT: 
Body Side Moldings/Cladding

MODELS: 
1996 (NS) Caravan/Voyager

NOTE:

This bulletin applies to LE (premium) and SE (high line) vehicles built prior to March 27, 1995 (MDH 03-27-XX).

DISCUSSION:

A change was made to the body side moldings/cladding of LE and SE trim level NS vehicles that increased the width of the body side moldings/cladding
by 3 mm. The original width LE and SE trim level body side moldings/cladding are not available for service and, if ordered through Mopar Parts, will be
superseded to the later style.

If it ever becomes necessary to replace a piece of the body side moldings/cladding on LE and SE trim level NS vehicles built prior to Mar. 27, 1995
(MDH 03-27-XX), all of the body side moldings/cladding pieces on the side of the vehicle that is being repaired will need to be replaced so their widths
will match.

POLICY: Information Only

Body and Frame|Frame > < Body Side Moldings and Cladding - Redesigned