Grand Caravan L4-2.4L DOHC (1996)
Liftgate Sill Plate
REMOVAL
1. Disengage hidden clips holding sill plate to liftgate door opening sill.
2. Separate sill plate from vehicle.
INSTALLATION
1. Place sill plate in position on vehicle.
2. Align locator rib into recess in liftgate sill.
3. Engage hidden clips to hold sill plate to liftgate door opening sill.
Liftgate Trim Panel
Liftgate Trim
REMOVAL
1. Remove liftgate upper frame molding.
2. Remove upper frame side moldings.
3. Remove screws holding assist handle to liftgate.
4. If equipped, using a trim stick (C-4755), pry courtesy lamps from liftgate trim.
5. Disengage wire connector from lamp.
6. Disengage hidden clips holding trim panel to liftgate from around perimeter or liftgate.
7. Separate liftgate trim panel from vehicle.
INSTALLATION
1. Place liftgate trim panel in position on vehicle.
2. Engage hidden clips to hold trim panel to lift- gate around perimeter or liftgate.
3. Engage wire connector into lamp.
4. Install courtesy lamps into liftgate trim.
5. Install screws to hold assist handle to liftgate.
6. Install upper frame side moldings.
7. Install liftgate upper frame molding.
