Grand Caravan L4-2.4L DOHC (1996)
6.
Open the hood and remove the 4 wing nuts holding the front of the cowl cover to the wiper module.
7.
Use a fiber trim stick to disengage the retainer clips attaching the ends of the cowl cover to the fenders.
8.
Lift the cowl cover enough to gain access to the right washer hose and disconnect the hose from the washer nozzle.
9.
Close the hood, do not latch, and separate the cowl cover from the vehicle.
10.
Open the hood and remove and discard the 2 fender mounted retainer clips and screws.
11.
Drill two 5/32 in. (4 mm) holes in the flanges of the front fenders as shown in Figure 2. Be sure to keep the fender flange surface smooth and
remove any burrs. Touch up paint the flange.
12.
Rivet both brackets (P/N 4860200 Rt. and 4680201 Lt.) on to the fenders lining up each bracket with the holes drilled in step 11, refer to Figure 3
for correct positioning, install 2 rivets (P/N 6035784) per side.
