Grand Caravan L4-2.4L DOHC (1996)
Front Park Brake Cable At Floor Pan
8. Lift floor mat for access to parking brake cable and floor pan. Pull the seal and the parking brake cable out of the floor pan of vehicle.
9. Pull parking brake cable strand end forward and disconnect button from clevis. Tap cable housing end fitting out of pedal assembly bracket.
10. Remove cable retainer from the parking brake pedal assembly bracket.
11. Pull parking brake cable assembly out of vehicle through hole in floor pan.
INSTALLATION
1. Pass parking brake cable assembly through hole in floor pan from the inside of the vehicle.
2. Pass cable strand button through the hole in the pedal assembly bracket.
3. Install cable retainer onto the parking brake cable and then install cable retainer into pedal assembly bracket.
4. Install the end of the parking brake cable into the retainer previously installed into the parking brake pedal bracket.
5. Install cable strand button into the clevis on the parking brake pedal mechanism.
6. Install the front parking brake cable floor pan seal into hole in floor pan. Seal is to be installed so the flange on the seal is flush with the floor pan.
Fold carpeting back down on floor.
7. Raise vehicle.
8. Insert brake cable and housing into body outrigger bracket making certain that housing retainer fingers lock the housing firmly into place.
9. Assemble the parking brake cables onto the parking brake cable equalizer.
10. Release the automatic adjuster mechanism on the parking brake pedal assembly.
11. Lower vehicle and apply the parking brake pedal 1 time, this will seat the parking brake cables.
